<\/p>\n

When you live in Arizona, like I do, the harsh sun can cause extensive damage and fading to anything you leave outdoors.\u00a0 And, in our case, the backyard concrete that had been stamped to look like slate had become quite an eyesore.\u00a0 Not only was it discolored, there were permanent rings of water damage caused by the overflow from sprinklers and a drip system to our plants.\u00a0 It was downright ugly…and it was time for a backyard makeover.\u00a0 Since my contribution was the painting, I thought I’d share with you How to Paint Concrete to Look Like Slate<\/strong>.<\/p>\n

The Before & After pictures of this backyard project are quite drastic, because as you will see, we gave up on our grass and decided to put in artificial turf.\u00a0 (Trust me, we’d rather have the real thing, too.\u00a0 But unless you’ve lived in Arizona, you could never, ever understand how tough it is to grow, reseed, and keep grass alive.)\u00a0 For the purposes of this blog, however, we are just focusing on the concrete.\u00a0 And here are a couple of shots of how bad it looked in the beginning.<\/p>\n

<\/p>\n

<\/p>\n

The first thing I did was power wash all the concrete so that I’d start with a clean slate.\u00a0 Errr, make that clean faux<\/em> slate<\/em>, if you’ll pardon my pun.\u00a0 In order to make it look like real slate, I couldn’t just buy a solid paint color and roll it on.\u00a0 In nature, nothing is ever a single flat color.\u00a0 So, for my faux slate<\/strong>, I actually combine three different paint colors.\u00a0 I start with a base coat of Valspar’s DuraMax exterior paint.\u00a0 (Notice the label says, “Maximum Weather Protection.”\u00a0 It’s supposed to be mold, mildew, and algae resistant, so I figured it should be good enough to cover these nasty water stains.)<\/p>\n

<\/p>\n

<\/p>\n

Unfortunately, the name of the base color is not printed on the can, but it’s kind of a generic medium brown color.\u00a0 The other two colors are Sherwin William’s “Dying Ember,” which has a little red in it, and Valspar’s “Burnt Tile,” which is the darker brown.\u00a0 You’ll notice I bought them in sample size, because believe it or not, that’s all you’ll need.\u00a0 A little goes a very long way.\u00a0 Here’s what it looked like with just the base color on:<\/p>\n

<\/p>\n

At this point, I was already feeling the instant gratification.\u00a0 What a relief to no longer see all the faded spots and water stains!\u00a0 But, like I said, in nature, there are no flat colors, so it was time to layer on a couple of other shades on top of this.\u00a0 I took a damp sponge and put just a tiny bit of the reddish paint on it, then quickly rubbed it all over a small section of the concrete.<\/p>\n

<\/p>\n

<\/p>\n

You can see just how damp my sponge is because the paint is very lightly rubbing on to the concrete.\u00a0 You want it to go into the grooves and be heavier in some spots than others.\u00a0 Remember, you’re trying to mimic nature.\u00a0 I should also mention that I, personally, prefer not<\/em> to use gloves, because I feel I have better control.\u00a0 I like knowing how damp my sponge is, getting a sense of when I should dip it into the water.\u00a0 If you don’t want to get your hands dirty, by all means, wear gloves.<\/p>\n

<\/p>\n

<\/p>\n

With the red layer still wet, I then dip the same sponge into the dark brown paint, and go over the same area. Now there’s glimpses of red and dark brown coming through in different areas.<\/p>\n

<\/p>\n

Once satisfied with how I painted the outdoor concrete, I let it dry overnight, and then went back the following morning and rolled a clear, high gloss sealer over the whole thing.\u00a0 There are a couple of brands you can use, I just happened to already have Quikrete left over from another project.\u00a0 It goes on a milky white, but dries clear.<\/p>\n

<\/p>\n

<\/p>\n

For added umph, I even spruced up the red curbing, rolling a layer of red concrete paint<\/strong> on it, while being careful not to get paint on the new artificial turf.<\/p>\n

<\/p>\n

<\/p>\n

All told, this back yard project took me three days, but the end result is a beautiful faux slate<\/strong> that I’m more than happy with.\u00a0 I hope you were able to pick up a few helpful tips on How to Paint Concrete to look like Slate<\/strong>, and that you are inspired to take on an outdoor project<\/a> of your own.\u00a0 Thanks for checking out my blog!<\/p>\n

<\/p>\n

<\/p>\n

If you liked this tutorial, you may also like my Poolside Towel Rack Blog<\/a>.<\/p>\n

Save<\/span><\/p>\n

Save<\/span><\/p>\n

Save<\/span><\/p>\n

Save<\/span><\/p>\n

Save<\/span><\/p>\n

Save<\/span><\/p>\n

Save<\/span><\/p>\n

Save<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

This is a step-by-step guide on How to Paint Outdoor Concrete to Look Like Slate. Using three layers of varying paint colors, you’re able to achieve a look that mimics nature. This blog includes pictures of each step, and shows you which paints to use for maximum durability outdoors.<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[19,12,15],"tags":[98,103,101,95,99,100,97,96,94,102],"_links":{"self":[{"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/posts\/2164"}],"collection":[{"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/comments?post=2164"}],"version-history":[{"count":13,"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/posts\/2164\/revisions"}],"predecessor-version":[{"id":2260,"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/posts\/2164\/revisions\/2260"}],"wp:attachment":[{"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/media?parent=2164"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/categories?post=2164"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.muralsbymarcy.com\/wp-json\/wp\/v2\/tags?post=2164"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}